کف کاذب کناف

 

Flooring Solutions

Knauf Flooring Systems specializes in raised flooring systems and access floors allowing for a multitude of possibilities. This is probably the best way to describe the character Of GIFAfloor - You can depend on the durability and high load-carrying capacity of these floors. The cornerstone for the high stability is already laid during the production of the plaster boards. The unique winding process by Knauf Integral determines the homogenous material structure before the extremely high compressing to 1500 kg/m³ and more takes place in the subsequent pressing process.

You can obtain GIFAfloor as panelled access floor green ware or sheet-panelled access floor with tongue and groove edging in various material thicknesses, and with standard or individual grid dimensions.

All components are optimally coordinated to one another. The panels are supplied to the construction site ready-to-lay, a surface primer applied at the factory protects the boards during transportation and laying, ensuring the full hardwearing capabilities of the floor right from the start.

Hollow Floors

GIFAfloor FHB
When you need to save time by installation

Are you in a hurry to implement your construction project? Then GIFAfloor FHB is just what you need!

The high speed of the installation of this single layer hollow floor enables rapid completion. Installations are accessible at all times thanks to the immediate or later combination with Knauf Integral GIFAfloor BD, for example in corridors or as an installation route. For maintenance or extension of the underfloor network, electric sockets, outlets and inspection opening can be installed at any point on the floor. Naturally, drywalling systems can be constructed on the GIFAfloor FHB.

The structure of the F181 system consists of single layer GIFAfloor FHB gypsum fibre elements in the format 600 x 1200 mm on steel supports.

The elements are laid staggered and with their evenly sanded surface are ready for almost any top covering overnight.

They come with standard thicknesses of 25, 28, 32 and 38 mm and have tongue-and-groove edges.

The individually adjustable supports are usually glued to the raw floor with a distance of 600 x 600 mm.

Single layer GIFAfloor hollow floors are especially suitable for small rooms and rooms where there is a high level of wastage due to cutting.